Category Archives: Pre-Press Consumables

Saati PW-4 Press Wash for plastisol inks

Removes ink from screen on press.

Characteristics

  • Recommended for use with Plastisol and UV-Cured inks
  • Flash point 49ºC/120ºF

Features/Benefits

  • Medium drying speed

Saati IR-18

 

Recommended to clean solvent-based, UV-cured & textile inks

Characteristics

    • Flash Point >200° F (93°C)
    • Low foam & low odor and can be used for manual or automatic cleaning
    • Can be mixed with Remove ER products and used as one-step ink & stencil remover solution

Features/Benefits

    • Emulsifies for easy water rinsing and avoids formation of ghost images
    • High efficiency formula reduces product consumption
    • Universal performance reduces the need for multiple ink removers
    • Can be re-applied after stencil removal to remove ghost images

Saati ER-2 Emulsion Remover Concentrate

Remove ER2 Emulsion Remover – 1:35 by Volume Formula

  • 1 to 35 liquid concentrate with built-in degreaser.
  • Powerful built-in degreaser cuts through the oily residue left during ink removal to speed stencil breakdown and to aid in mesh degreasing

Saati – Textil PHU-HR Emulsion – Universally Resistant Higher Resolution Textile Pure Photopolymer – 6x Speed

All purpose solvent and water resistant photoemulsion

Characteristics

  • Red one part pure photopolymer emulsion with universal ink resistance
  • Exposes 6x faster than typical two part emulsions
  • Easy Reclaim

Features/Benefits

  • 42% solids and high viscosity for easy coating
    and good bridging on all mesh counts
  • Universally resistant, can be used with solvent based,
    UV, and water based inks, yet is easy to reclaim
  • Recommended for use with discharge inks as is, without
    using diazo or catalyst for stencil hardening

Saati – Grafic PU Emulsion – Blue General Graphics Pure Photopolymer – 4x Speed

The convenience and speed of a pure photopolymer with the versatility and price of a dual-cure

Characteristics

  • Blue pure photopolymer emulsion
  • Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed
  • High solids content and medium viscosity for excellent print definition on any mesh
  • Easy to reclaim

Features/Benefits

  • Pre-sensitized with no mixing required, long shelflife with consistent performance
  • SBQ technology, exposes 4 times faster than twopart emulsions and leaves no diazo stains
  • Low friction stencil surface for improved durabilitywhen used with abrasive inks

Saati – Grafic PS2 Blue Emulsion – Blue General Graphics Pure Photopolymer – 3x Speed

A durable and fast photopolymer presensitized emulsion. Blue in color. Requires no mixing!

Characteristics

  • Blue pure photopolymer emulsion
  • Resistant to UV-cured, plastisol and solvent-based ink
  • Exposes three times faster than diazo or dualcureemulsions with no mixing required
  • Very easy to reclaim
  • Very solvent resistant

Features

  • 1-part emulsion replaces 2-part solvent-resistant emulsions with no mixing, no stains, and long shelf life

Saati -Grafic HU Emulsion – General Graphics Dual-Cure – 1x Speed

 

General industrial and display graphics, compact disc, half-tone printing.

Characteristics

  • Dual-cure direct emulsion for printing UV-cured,
    plastisol, solvent-based and water-based inks
  • Excellent print definition on any mesh
  • 39% solids content

Features/Benefits

  • Low friction stencil surface prints fine details cleanly and
    improves durability when used with abrasive inks

Screen Tapes

#451 Split Tape

Blue areas do not contain adhesive allowing Split Tape to peel cleanly without leaving residue, tearing, or damaging your emulsion.

For masking the inside of rigid aluminum, roller, and wood frames.

#451FA Full Adhesive Tape

Same adhesive and backing as Split Tape allowing for a clean removal. Just without the blue adhesive-free areas.

For taping further into the screen, taping the print side of screens as a block out tape, and masking the inside of wood frames.

#260 Quick Rip Tape

Hand-tearable with a blue non-adhesive edge providing a tab to lift Quick Rip Tape from the screen. Same adhesive and backing as Split Tape allowing for a clean removal.

For taping the print side of screens as a block out tape

Pro-Cap Diazo Film

Chromaline’s economically priced, diazo based capillary film is a convenient, dependable performer with a reputation for producing trouble-free screens. The “workhorse” capillary film for use with UV, solvent-based and plastisol inks. For screen makers demanding high edge definition and reliable durability at a price value. Pro/Cap also provides these additional benefits:

  • Superior film penetration and adhesion
  • Easy to use, easy to learn
  • Excellent solvent resistance

Magna/Cure UDC2 Dual Cure Emulsion

CHROMALINE Magna/Cure UDC-2 provides the perfect combination of price and performance. Excellent definition and line edgeance. With superior exposure speed and latitude and moderate water resistance, UDC-2 is ideal for printers in nearly every category.

  • Blue color offers excellent contrast for easy registration
  • Highest build-up proud of mesh with low Rz values
  • Clear or dyed
  • Water, solvent, UV and plastisol ink resistant
  • Ideal for all mesh counts
  • Medium viscosity