The Accu-Print High Tech V Long Stroke press has been engineered specifically for the demands of banner printing and other long, large format substrates. The all hydraulic, vertical lift drive offers ultra smooth operation at full production speeds as well as better access to the working area. This press can be easily set to stop at any height, lateral print stroke direction provides better support for the squeegee and assures a consistent ink lay down for high coverage areas. Unlike conventional long stroke presses, the High-Tech V-LS is designed with parallel peel, an exclusive feature that results in a more consistent flood stroke.
As with other High-Tech V Series presses, the Long Stroke offers micro-processor control of all functions. The computer controlled stroke adjustment feature ( patented ) sets front and rear positions at the control panel... without manually sliding sensors. The unique ink recovery system is also actuated at the front of the press, moving the carriage past the pre-set limits to pick up excess ink in the well. The left or right carriage stop mode places the carriage in flooded or unflooded position after the print stroke, allowing the operator to adjust to the requirement of either solvent system or UV curable inks. For distortion control of large stock, the High-Tech Long Stroke vacuum control system can be set from gradual to full activation across the length of the print stroke. The quiet, maintenance-free vacuum motor delivers adjustable hold-down at the lowest noise levels in the industry, while the blow-back feature allows easy stock removal after printing.
The pneumatically activated left and right sliding frame lock system secures smaller screen frames, eliminating the need to worry about mechanical clamp positions.
World-Wide direct service instantly via remote telephone modem hook-up
Press Diagnostics & Productivity Interface
Instant, on-board trouble shooting with productivity enhancement programming. Screens include basic press information, automatic error messages and individual job status. Works with remote phone modem to reduce downtime and maximize service turnaround.
Automatic Computer Controlled Stroke Setting
Sets stroke quickly up front, without moving sensors
Advanced Ink Recovery
Shifts squeegee 1" to 3" beyond rear stroke setting to recover ink in the well, streamlines production and improves ink mileage.
Pneumatic Front & Rear Sliding Frame Lock System
Location of individual frame clamps is no longer a limit to screen size
New Exclusive Peel System
Up-front easy to access controls
Pneumatic Squeegee Pressure Equalizer
Automatically levels squeegee pressure across the substrate
New bearing actuated system provides precise registration, with tolerances to +/- .002" with no "backlash"
"Tool-free" Squeegee/Flood-bar Pressure Settings
Easy access to micro-calibrated knobs
Key Operated Carriage Cycle Protection
Prevents accidental cycling of the press when the masterframe is disengaged for set-up and cleaning.
Left or Right Carriage Stop Mode
Toggle switch on the main control panel stops carriage in flood ( solvent system ) or non-flood ( UV curable ) mode.
Accepts all frame types, including roller-frames; disengages from support arms for better access during set-up and cleaning
Four Point Off-Contact Control
Easily accessible turnbuckle settings and rear screen holder height adjustments.
Four Point Masterframe Lock-in
Ball-bearing head lock for the tightest repeatable registration performance
New Tool-free Peel Rate Setting
Allows infinite adjustment to the automatic peel system from 1/4" to 4"
New Tool-free Position Setting For Front and Rear Screen Holders
To accommodate smaller screen sizes
All Aluminum Vacuum Table
3" thick table with the heaviest gauge plate in the industry top and bottom
Brush-free, Maintenance Free Vacuum Motor
Is the quietest in the industry
Allows minimal off-contact settings to take advantage of today's high performance, high tension screens
Three-Way mode selection
Timer, Jog and Foot Pedal selections available
Independent squeegee and flood bar speeds
An essential print quality control feature
Squeegee/flood bar angle adjustments
For absolute print control on challenging jobs
Independent carriage stroke and head lift drive
Assures smooth, even print stroke
Belt drive heavy duty ball bearing print carriage
Ensures quiet trouble-free / vibration-free operation
Front Safety Sensor & Side Bars With Lift-Back™
Protects operator on three sides and lifts heads when activated